1. Main parameter：

1.1. The total power of the machine is 11 kW, 380VAC 50HZ;

1.2. Spindle speed control motor: 0-10000 rpm, 6 kW;

1.3. Overall dimensions: 6500X3200X2300MM;

1.4. Maximum processing plate size: 1350X230MM;

1.5. Fully automatic servo new generation CNC system;

1.6. Applicable to cutting processing of PET, PVC light wood, etc,

1.7, Chamfer range: ± 20 degrees,

1.8. Processing tolerance: ± 0.5MM,

1.9, fully automatic control, human-machine dialogue, easy to operate, CAD graphic format directly imported for processing.

2.Equipment technical specifications and parameters 

2.1Cutting ability 

2.11 Cutting angle ± 20 degrees;

2.12 Cutting width: 1300mm;

2.13 Cutting materials with a thickness of no more than 230 millimeters;

2.14 Requirements for equipment processing accuracy: Generally, the tolerance for chamfering angle is ± 0.5 °, and the minimum tolerance for chamfering is 0-1.0mm.

2.15 Requirements for equipment processing speed: conveyor belt speed range ≤ 15 meters/minute.

2.16 Requirement for model change time: parameterized setting, with a change time of ≤ 15 seconds.

2.17 Requirements for equipment product placement width: 1350MM for transmission width.

2.2 Requirements for electrical parameters of equipment:

2.21 Required equipment power: 11KW saw blade with a maximum speed of 6000 rpm;

2.22 Requirements for feed power supply: 380V;

2.23 Requirements for saw blade material: alloy steel saw blade, service life: 1-2 months (conservative numbers);

2.24 Requirements for using compressed air pressure range: 0.5-0.7Mpa.

2.25 Operation method required: One click (intelligent) operation is adopted, that is, the start and stop buttons control the vacuum adsorption action, conveyor belt action, and band saw rotation action, which is energy-saving, stable, and reliable.

2.26 Chamfer processing produces a large amount of blocky leftover materials, and the equipment must be able to connect to a central vacuum pipeline for collection.

2.27 The dust generated by chamfering processing must be equipped with a vacuum interface to be introduced into the central vacuum pipeline.

2.3 Safety protection

2.31 requires that the cutting and transmission parts of the equipment be inside the overall protective cover to ensure transmission safety and waterproofing;

2.32 requires the compressed gas inlet to be equipped with an oil-water separation device to ensure that the cooling water does not leak out.

2.33 requires that all live lines of the equipment must not be exposed outside the bed and must be concealed inside a protective cover;

2.34 requires the travel limit switch to be inside the overall protective cover to ensure limit safety;

3. Main equipment configurations:

3.1. Spindle variable frequency speed control spindle motor: Yuhai;

3.2. Low voltage apparatus: Schneider * 1 set;

3.3. Full digital control of groove depth: OMRON;

3.4. Screw slide: Taiwan Shangyin;

3.5. Pneumatic control system: Taiwan Yadeke * 1 set;

3.6. Saw group: Nengda self-made * 1 group;

3.7. Operation control system: Taiwan's new generation * 1 set;

4. Suggested use of cable: 3 * 10+1

5. Dust collection port 4-D100&2-D160

6. Lead time: 60 Working day.